Kamry K100 Mod



Pin It Fancy

Kamry K100 Telescopic Mechanical Mod



The Kamry K100 is a simple, fully mechanical 510 and eGo threaded MOD. It is compatible with most 510 and eGo threaded atomizers, cartomizers, and clearomizers. The switch is mechanical and located at the base of the device. The collar on the switch assembly can be screwed down to lock the switch and prevent accidental discharge. Multiple vent holes have been punched in the tube for added protection. Compatible with a wide array of batteries including 18350, 18490, 18500, 18650, button top and flat top.

Mechanical MODs have no electronics / no protection circuit and should ONLY be used with IMR type batteries with a Short/Safety Fuse.

Warning: The telescopic tube should be fastened on just enough so that when the button is depressed, the atomizer on the device activates. The over-fastening of the telescopic tube will push down the button spring and cause the device to stay "activated". This will cause the battery to overheat.

 

Features:

-Anodized Aluminum Finish
-Telescopic style tube allows use of IMR 18350, 18490, 18500 & 18650 rechargeable 3.7V Li-ion batteries (button or flat top)
-510 / eGo threading will allow use of a wide variety of Atomizers, Cartomizers, Clearomizers & Tanks. Can be used with Kanger eVod Clearomizers however Kanger T2, T3 and any wide base eGo threads WILL require use of a 510 to eGo Thread Adapter.
-Bottom switch / button design that is "lockable"
T-hree vent holes in three different areas (nine vent holes total)
-Can be "Kicked" to add variable wattage with use of 18350, 18490 & 18500 Li-ion batteries
-Will allow use of a Safety Fuse to add short circuit protection with use of 18350, 18490, 18500 & 18650 Li-ion batteries

 

Included:

1x Kamry K100 Mod

 

 

Caution: Use special caution when working with Li-ion or Li-MN cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous

Alluring Vapors will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of an Li-MN or LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

Related Items