Tobeco Kuro Coiler Tool (20mm, 25mm, 30mm)

Type: Tools

Pin It Fancy

Tobeco Kuro Coiler Tool (20mm, 25mm, 30mm)

The Tobeco Kuro Coiler is easily the most revolutionary, ultra functionary auto coiler that will create tight, uniform coils in just seconds. Build from 20 - 28 Gauge rounded kanthal wire 


Make perfect micro coil in seconds
Light weight and portable
Available in three sizes: CW-20 - Makes 2 mm coils, CW-25 - Makes 2.5mm coils, CW-30 - Makes 3mm Coils


  1. Insert wire through hole on the side of the handle. Leave about 1/2" of the wire protruding from the hole. Hold the end of the wire against the handle so it won't pull through
  2. Pull the loose end of the wire around the shaft
  3. Slide the winder section over the shaft with the pin facing toward the handle
  4. Turn the winder section so that it catches the wire and starts wrapping it around the shaft. Keep light pressure against handle while winding. Excessive pressure will force smaller gauge wire to wrap over itself
  5. When finished, remove winder and straighten the wire end that protrudes from the hole in the handle
  6. Push up on the wire to slide coil up. Carefully grab the coil at the bottom to slide it off the shaft
  1. Note: The coiler winds the coils with the loops touching each other. This can initially give wrong resistance values without first burning in the coil. Care must be taken when first firing the device with a new coil. Carefully pulse the device to bring temperature upo slowly so ou do not create a "hot leg" and melt the coil. Rake the coils lightly in between pulsing to improve the break in process. Pre-burning or oxidizing the wire before making the coil may also help.


1 x Tobeco Kuro Coiler Tool in Your Choice of Size

Related Items